Fazua Motor Tuning

Fazua Motor Tuning

Paul Ebikes Parts and Accessories2 comments

 

Fazua is a German company from Bavaria which released their first engine in 2017. The launch of the Fazua Evation engine system immediately caught the attention from the public and from e-bike manufacturers due to its unique design. Per example, the conventional setup of having the heavy drive unit mounted on the bottom bracket has been replaced by the gear unit. The gear unit transmits the power of the motor to the drive which can determine the pedalling force of the rider by using several sensors. The actual motor is located in a cylindrical extension along with the battery to form a single unit. This unique concept makes it possible to decouple the motor unit and gearbox so that the Evation can be easily removed from the frame with just one click.

In 2022, a new drive system is released, the FAZUA Ride 60. This new drive system is more powerful than its predecessor, with an additional 10 Nm of extra torque totalling a max torque of 60Nm. The Fazua Ride 60 motor weights only 1.96 kg and thus an excellent power / weight ratio. 

We do have in store a couple of tuning solution for the Fazua engines. The SpeedFun Fazua does a good job here since the installation is simple and do not require to dissemble the engine to access the engine ports. Another good option is the BadassBox 4 Fazua since it is a contact-less tuning box that simply slide over the speed sensor and it is installed / removed in just few clicks. It is compatible only if the magnet is located on the wheel spoke.

SpeedFun Fazua Ride 60 compatible only with the Fazua Ride 60 engines. The maximum assisted speed is 50 km/h. The correct speed is displayed up to 25 km/h, then from 20 km/h to 42, the speed is halved. For speed above 42 km/h the speed is divide by 3.

SpeedFun Fazua is NOT compatible with the Fazua Ride 60 engines. The maximum assisted speed is 50 km/h. The displayed speed will be incorrect. For this motor configuration we do offer an engine cover lid to protect the engine from debris and dirt pushed up into the engine from the rear wheel Fazua Container Lid 

badassBox 4 Fazua Compatible with the Fazua system with the magnet on the wheel spoke. The badassBox is the easiest tuning to install and remove since it slides over the speed sensor. The whole installing procedure does not take more than 1-2 minutes. 

badassBox 4 X-set Compatible with the Fazua system with the magnet integrated on the brake rotor and the speed sensor integrated into the fork-end. This configuration requires the removal of the rear wheel and to to move the speed sensor on the chain-stay. The whole installing procedure should not take more than 5 -10 minutes. Instructions for the installation can be found here badassBox 4 X-set

If you are still unsure which tuning is compatible with your engine just send us a message via our website chat box. We are here to help you out! 

Comments (2)

Lee Stephenson

I’ve had to update my Evation motor, no way round it. Will my badassBox 4 still work??

Steeve Jolin

Hi,

I have a look E765 2022. What badassBox4 is best for me?
Thanks

Leave a comment

Please note, comments must be approved before they are published