EPAspeed Tuning for Mahle EBIKE MOTION X35 and X35+

EPA

€149,00

Tax includedShipping calculated at checkout

 

 

 

 

EPAspeed Tuning for Mahle Ebike Motion X35 and X35+

The EPAspeed is compatible with all hub motors with a 9-pin connection that have a speed sensor integrated into the motor, such as the Mahle X35 or X35+ which are also known as the Ebike Motion X35 and X35+. The tuning is installed directly on the cable that connects the hub engine to the e-bike battery, which run along the chainstay.

Properties
Assistance: Increases assistance up to 30 Km/h and more
Display shows: real values from the display or from the phone app (speedometer and distance travelled)
Speed limits setting: NO
Activation / Deactivation: Device is always active from the moment of installation
Compatible with: Mahle Ebike Motion X35 and X35+ 
Not compatible with: Mahle Ebike Motion X20 
Dimensions and weight: 14 x 10x 170mm, 25g.


How the EPAspeed Mahle works? 
Once the EPAspeed tuning is installed the tuning is always active. The speed and distance travelled are shown in real values so you can enjoy you ride knowing that all your data is always accurate both on your bicycle display (if your e-bike is equipped with a display) and on the Ebike Motion App. Therefore, there is no need for an additional GPS to track the correct values of your rides. 
Once the tuning is removed the bicycle automatically reset to the original pre-tuning settings.

Important: Due to the constructive characteristics of the hub motor with the speed sensor integrated into the hub motor it is difficult to predict the maximum derestricted speed allowed. Theoretically, speeds of up to 40 km/h are possible  but in reality speeds of up to 30 km/h are within the tolerance range. This is due to the fact that it is a hub motor with 40 Nm of torque which quickly reaches its limits. If the tuning does not allow for higher speeds, this is not caused by the tuning itself but instead it is related to the limitations of the motor, battery and their firmware.

The main features
-Easy & fast installation and uninstallation. Plug and play!
-Retains the accuracy of the speedometer and distance travelled
-Equipped with original connectors does not require any modification to the    original parts of the ebike
-The engine will assist for speed of 30 km/h and more
-Suitable for al hub motors with the 9-pins plug configuration such as the Mahle Ebike Motion X35 and X35+
-Does not need external batteries or power supply

Attention: Please do not carry out any updates after installing and using a tuning! Afterwards, compatibility may no longer be guaranteed!


Scope of delivery
-1 EPAspeed Tuning for Mahle Ebike Motion X35 and X35+
-2 cable ties
-Instructions

 

You May Like

Product title
€19,99 | €24,99
Quick Shop
Product title
€19,99 | €24,99
Quick Shop
Product title
€19,99 | €24,99
Quick Shop
Product title
€19,99 | €24,99
Quick Shop