SpeedBox 1.1 for Bosch (Smart System)

SpeedBox

4.47/5.0 based on 17 reviews

€199,00 €229,00 Save €30

Tax includedShipping calculated at checkout

SPEEDBOX 1.1 BOSCH SMART SYSTEM
Unlock the speed limit of your electric bike with a Bosch SpeedBox tuning dongle kit. Unleash the full speed of your e-bike engine and ride it like a derestricted e-bike should be!

THE TUNING CHIP FOR E-BIKES WITH THE NEWEST BOSCH GEN4 MOTOR AND SMART SYSTEM.

COMPATIBLE WITH DISPLAYS:
   KIOX
   INTUVIA
   NYON
   PURION
   COBI


COMPATIBLE WITH ENGINES (incl. Gen4):
   Active Line Plus
   Performance Line
   Performance Line CX Line
   Performance Line Speed
   Cargo Line


NOT COMPATIBLE WITH:
 Not compatible with e-bikes that have a magnet attached to a valve (Bosch Rim Magnet)

The SpeedBox 1.1 enables you to derestrict the speed limiter on your e-bike. When in use, the display shows the real speed up to 22.2 km/h. After exceeding this speed the actual speed will be indicated on the last two digits of the display.

Example:
- 22.3 corresponds to a speed of 23 km/h
- 23.1 corresponds to a speed of 31 km/h

If you want to retain the correct speed and all riding data then we recommend choosing the SpeedBox 1.1 B.Tuning for Bosch. With SpeedBox 1.1 B.Tuning for Bosch, you can retain the real values in our SpeedBox App – right on the display of your phone.

HOW DOES SPEEDBOX 1.1 BOSCH WORK?
To activate all the functions of the SpeedBox correctly, it is necessary to enter the menu after the first switching on of the e-bike after the tuning installation and switch to the circumference of your bike.
You will activate the SpeedBox 1.1 tuning chip directly on your e-bike’s control unit by activating the WALK assist function shortly (holding down the “-” button). Your e-bike display will show a value of 9,9 km/h (6,2 mph) and from now on you will be able to ride at unlimited speed.
To deactivate the tuning chip, activate the WALK assist function shortly again (by holding down the “-” button). Your e-bike display will show a value of 2,5 km/h (1,6 mph) and the speed limit will be reset to 25 km/h. Your e-bike will then work the same as before the chip installation.
SpeedBox was also designed for e-bikes that do not have the WALK assist function enabled, or activated. In this case, you can activate/deactivate tuning by switching between two assistance modes twice, i.e. by pressing the +-+- buttons.
The "countdown" process will continue concealed during charging, therefore, if you charge your e-bike with a connected battery, you can ignore the following instructions. If you need to remove the battery from your e-bike in order to charge it, you need to wait for the SpeedBox to carry out the "countdown" process after the ride. When you stop your e-bike, the ongoing "countdown" process will be indicated by the increasing riding time. Once the "countdown" process is completed, the riding time stops and the e-bike display shows the correct distance travelled. The countdown process can be interrupted by turning off the e-bike or by setting off, so it does not restrict the use of your e-bike in any way. However, you still need to have the countdown process run regularly to prevent tuning detection.

SPEEDBOX QUALITY & LIVELONG WARRANTY
The SpeedBox is manufactured with high quality certified automotive industry components. The tuning hardware is completely sealed and protected by a rigid casing which guarantee for toughness, impermeability, and thus hardware longevity. Each SpeedBox is tested several times during and after the manufacturing process. Thanks to these high quality standards the SpeedBox comes with a Lifelong warranty.

WARNING

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries.
We recommend not updating the firmware of your e-bike. Updating increases the risk of tuning detection.
When stopping for a short time, in order to continue riding smoothly, we recommend keeping one foot on the pedal so that the countdown does not start.
When stopping for a longer period of time, allow at least a partial countdown to take place.
After a long ride, the countdown may take several minutes.
Do not remove the display if the countdown has not been finished.
Activate/deactivate the tuning before the ride (when the e-bike is standing still), not during riding.

We recommend not to exceed a speed of 35 km/h.

 

INSCTRUCTION MANUAL 

https://www.youtube.com/watch?v=4JNAbzm0KAA

https://tuningelektrokol.s9.cdn-upgates.com/b/b65699fccaf65e-sb11-b-manual-en.pdf

https://tuningelektrokol.s9.cdn-upgates.com/5/5652f92e380dfc-sb11-b-manual.pdf

You may also like