SpeedBox 3.1 for Brose

Beschrijving

EIGENSCHAPPEN:
Maximale snelheid: Onbeperkt
Speed limit setting: On the display or in the SRAM AXS app
Display toont: Werkelijke snelheid
Tuning activeren/deactiveren:
WALK-functie
Knopcombinatie – + – + of + – + –

Compatibel met motoren:
Brose GESPECIALISEERD
Brose S-MAG
Brose S
Brose T
Brose C
Brose T-ALU
SRAM-aandrijflijn van Brose

Niet compatibel met motoren:
Brose S Mag FIT
Gespecialiseerde GEN 4 (3.1/S-Works)
BROSE Specialized SL
(For SL models use SpeedBox 3.1 for Specialized)

Niet compatibel met e-bikes:
E-bikes die geen connector in de displaypoort hebben
(meestal zit er gewoon een dummy-plug in)

Niet compatibel met:
Enviolo Automatiq
SpeedBox-app

Smart third-generation tuning for Brose and Specialized motors, including the SRAM Powertrain unit
SpeedBox 3.1 for Brose unlocks the speed limiter and allows riding at an almost unlimited speed, which will depend only on the pedaling cadence.

Hoe werkt SpeedBox 3.1?
The tuning kit can be activated directly on your bike’s controller. By activating the WALK assist function shortly, a value of 99 km/h (62 mph) is displayed. From now on, you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, activate the WALK assist function shortly again. The value of 25 km/h (16 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the tuning.

SpeedBox was also designed for e-bikes that do not have a classic control unit with WALK assist function. In this case, you can just use the combination of + – + – buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

You can set the maximum speed of electric assistance by switching modes three levels down and then three levels up: TURBO – TRAIL – ECO – OFF – ECO – TRAIL – TURBO. An actual speed limit will be displayed after that. The maximum speed of electric assistance can be adjusted by briefly activating the WALK assist function or by turning the rear wheel 360°. The speed will always increase by 5 km/h. The last displayed limit will be saved after 5 seconds of inactivity.

The speed indication in the Specialized Mission Control app is not functioning correctly. If you have a TCU without a display on your e-bike, we recommend purchasing the B.Tuning version compatible with the SpeedBox App.

Montage
When connecting the SpeedBox to an e-bike, you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning product is just as easy. If you have any trouble with installation or disassembly, do not hesitate to contact us.

Als u SpeedBox op een gloednieuwe fiets wilt installeren, zorg er dan voor dat u er minimaal 10 km mee fietst voordat het product wordt geactiveerd.

Activering en deactivering van SpeedBox-tuning voor e-bikes met SRAM Powertrain-unit
Om de tuning te activeren of deactiveren, activeert u kort de WALK-functie of schakelt u tussen twee ondersteuningsmodi (+ – + -).
Activering van tuning (onbeperkte snelheid) → het display geeft een batterijwaarde van 99% weer, wat overeenkomt met een maximumsnelheid van 99 km/u.
Deactivering van de tuning (beperkte snelheid) → het display geeft een batterijniveau van 25% aan, wat overeenkomt met een snelheidslimiet van 25 km/u.