TEST1
PROVA 2
PROVA 3
PROVA 4
PROVA 5
PROVA 6
Precedente
Immagine prodotto precedente

Copertura dell'alloggiamento badassBox 4

Il prezzo originale era: € 155,00.Il prezzo attuale è: € 19,00.
Succ

badassBox 5 per magnete per cerchioni BOSCH BDU37

 249,00
Immagine prodotto successivo

badassBox 4 SPECIALIZED-SET per LEVO (fino al 2019) VADO, KENEVO (fino al 2020) e COMO

Il prezzo originale era: € 155,00.Il prezzo attuale è: € 139,00.

— O —

COD: 4260475460334 Categorie: , , Etichetta:

Descrizione

Sblocca i limiti di velocità della tua bici elettrica con la centralina Specialized badassBox. BadassBox è la centralina per bici elettrica più semplice da installare e rimuovere. Non è necessario rimuovere cavi o coperchi motore: basta far scorrere BadassBox sul sensore di velocità e sei pronto a partire! Scatena la massima potenza del motore della tua bici elettrica e guidala più veloce che puoi! 

NOTA: BadassBox supporta l'assistenza del motore fino a circa 35-37 km/h, ma non mantiene dati accurati sulla velocità sul display di bordo. Di conseguenza, i ciclisti devono affidarsi a dispositivi GPS esterni (ad esempio, ciclocomputer o smartphone) per ottenere letture corrette della velocità. 
Al contrario, l'EPAspeed BOX supporta velocità assistite fino a 50 km/h, mantenendo la precisione del tachimetro di fabbrica e offrendo la soluzione di regolazione contactless più avanzata attualmente disponibile.

👉 Clicca Qui per visualizzare l'EPAspeed BOX per Brose

 

Set di ordinazione per e-bike Specialized con sensore integrato/incorporato:
Turbo Levo (prima dell'anno modello 2019), Turbo Vado, Turbo Kenevo (prima dell'anno modello 2020), Turbo Como.

Per tutte le altre e-bike Specialized è necessario il BadassBox 4 Set specializzato Turbo Levo 2019 
Il montaggio richiede una piccola conversione. Si prega di leggere attentamente le istruzioni. istruzioni prima di ordinare!

CONTENUTO DELLA CONFEZIONE: badassBox 4 Brose con batteria AAA, magnete per raggi con vite a testa zigrinata e adattatore Turbo Levo.

Attenzione, solo il sensore normale (prima immagine) è compatibile con questa variante per il sensore a forma di spillo è necessario il badassBox 4 Specialized-Set Turbo Levo 2019

Il set badassBox 4 Specialized contiene le parti necessarie per montare il badassBox 4 Brose sulla tua e-bike Specialized a un prezzo ridotto.

 

 

                                                                                                  

Informazioni aggiuntive

Peso 0,085 kg

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “badassBox 4 SPECIALIZED-SET for LEVO (up to 2019) VADO, KENEVO (up to 2020) and COMO”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

HOW TO INSTALL THE BADASSBOX:
For best results, during the installation of the badassBox keep the bike engine TURNED OFF at all times.

1)  Remove the battery from the badassBox and make sure that it is fully charged. Wait before re-inserting the battery.

2)  Slide the badassBox over the speed sensor and install the magnet on the wheel spoke. Align the magnet as shown below.

3)  Make sure that the battery was removed from the badassBox for at least 30 seconds before re-inserting into the badassBox.

4) Turn on the system and make a few wheel turns. If the display shows a speed, the device is working.

 

NOTA:
On certain e-bikes models it may be advised to relocate the magnet on the rear spoke or to twist it at 90 degree (magnet facing up or down) to allow more tolerance between box and magnet.

 

RETURNS:

The returned BadassBoxes are tested with a specific badass diagnostic tool for any errors/malfunctions. In the majority of the cases boxes are in good working conditions so please make sure that you have followed the instruction correctly before requesting a new unit.

BEFORE RETURNING THE BOX CHECK THAT THE BATTERY IS NOT THE CAUSE OF THE MALFUNCTION.

Carrello della spesa

0
immagine/svg+xml

No products in the cart.

Continua gli acquisti