SpeedBox 3.1 for Brose

Description

PROPRIÉTÉS:
Vitesse maximale : Illimitée
Speed limit setting: On the display or in the SRAM AXS app
L'affichage indique : Vitesse réelle
Activation/désactivation du réglage :
Fonction WALK
Combinaison de boutons – + – + ou + – + –

Compatible avec les moteurs :
Brose SPÉCIALISÉ
Brose S-MAG
Brose S
Brose T
Brose C
Brose T-ALU
Transmission SRAM par Brose

Non compatible avec les moteurs :
Brose S Mag FIT
Spécialisé GEN 4 (3.1/S-Works)
BROSE Spécialisé SL
(For SL models use SpeedBox 3.1 for Specialized)

Non compatible avec les vélos électriques :
Vélos électriques qui ne possèdent pas de connecteur dans le port d'affichage
(généralement, il y a juste un bouchon factice à la place)

Non compatible avec:
Enviolo Automatiq
Application SpeedBox

Smart third-generation tuning for Brose and Specialized motors, including the SRAM Powertrain unit
SpeedBox 3.1 for Brose unlocks the speed limiter and allows riding at an almost unlimited speed, which will depend only on the pedaling cadence.

Comment fonctionne SpeedBox 3.1 ?
The tuning kit can be activated directly on your bike’s controller. By activating the WALK assist function shortly, a value of 99 km/h (62 mph) is displayed. From now on, you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, activate the WALK assist function shortly again. The value of 25 km/h (16 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the tuning.

SpeedBox was also designed for e-bikes that do not have a classic control unit with WALK assist function. In this case, you can just use the combination of + – + – buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

You can set the maximum speed of electric assistance by switching modes three levels down and then three levels up: TURBO – TRAIL – ECO – OFF – ECO – TRAIL – TURBO. An actual speed limit will be displayed after that. The maximum speed of electric assistance can be adjusted by briefly activating the WALK assist function or by turning the rear wheel 360°. The speed will always increase by 5 km/h. The last displayed limit will be saved after 5 seconds of inactivity.

The speed indication in the Specialized Mission Control app is not functioning correctly. If you have a TCU without a display on your e-bike, we recommend purchasing the B.Tuning version compatible with the SpeedBox App.

Assemblée
When connecting the SpeedBox to an e-bike, you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning product is just as easy. If you have any trouble with installation or disassembly, do not hesitate to contact us.

Si vous envisagez d'installer SpeedBox sur un vélo neuf, assurez-vous de le parcourir pendant au moins 10 km avant d'activer le produit.

Activation et désactivation du réglage SpeedBox pour vélos électriques équipés d'un groupe motopropulseur SRAM.
Pour activer ou désactiver le réglage, activez brièvement la fonction WALK ou basculez entre deux modes d'assistance (+ – + -).
Activation du réglage (vitesse illimitée) → l'écran affichera une valeur de batterie de 99 %, ce qui correspond à une vitesse maximale de 99 km/h.
Désactivation du réglage (vitesse limitée) → l'affichage indiquera une valeur de batterie de 25 %, ce qui correspond à une limite de vitesse de 25 km/h.