SpeedBox 3.1 for Brose

Descripción

PROPIEDADES:
Velocidad máxima: Ilimitada
Speed limit setting: On the display or in the SRAM AXS app
La pantalla muestra: Velocidad real
Activación/desactivación de la sintonización:
Función WALK
Combinación de botones – + – + o + – + –

Compatible con motores:
Brose ESPECIALIZADO
Brose S-MAG
Brose S
Brose T
Brose C
Brose T-ALU
Sistema de transmisión SRAM de Brose

No compatible con motores:
Brose S Mag FIT
Specialized GEN 4 (3.1/S-Works)
BROSE Specialized SL
(For SL models use SpeedBox 3.1 for Specialized)

No compatible con bicicletas eléctricas:
Bicicletas eléctricas que no tienen conector en el puerto de pantalla
(normalmente solo hay un tapón ficticio)

No compatible con:
Enviolo Automatiq
Aplicación SpeedBox

Smart third-generation tuning for Brose and Specialized motors, including the SRAM Powertrain unit
SpeedBox 3.1 for Brose unlocks the speed limiter and allows riding at an almost unlimited speed, which will depend only on the pedaling cadence.

¿Cómo funciona SpeedBox 3.1?
The tuning kit can be activated directly on your bike’s controller. By activating the WALK assist function shortly, a value of 99 km/h (62 mph) is displayed. From now on, you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, activate the WALK assist function shortly again. The value of 25 km/h (16 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the tuning.

SpeedBox was also designed for e-bikes that do not have a classic control unit with WALK assist function. In this case, you can just use the combination of + – + – buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

You can set the maximum speed of electric assistance by switching modes three levels down and then three levels up: TURBO – TRAIL – ECO – OFF – ECO – TRAIL – TURBO. An actual speed limit will be displayed after that. The maximum speed of electric assistance can be adjusted by briefly activating the WALK assist function or by turning the rear wheel 360°. The speed will always increase by 5 km/h. The last displayed limit will be saved after 5 seconds of inactivity.

The speed indication in the Specialized Mission Control app is not functioning correctly. If you have a TCU without a display on your e-bike, we recommend purchasing the B.Tuning version compatible with the SpeedBox App.

Asamblea
When connecting the SpeedBox to an e-bike, you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning product is just as easy. If you have any trouble with installation or disassembly, do not hesitate to contact us.

Si planea instalar SpeedBox en una bicicleta nueva, asegúrese de recorrerla al menos 10 km antes de activar el producto.

Activación y desactivación de la optimización SpeedBox para bicicletas eléctricas con unidad SRAM Powertrain
Para activar o desactivar la sintonización, active brevemente la función WALK o cambie entre los dos modos de asistencia (+ – + -).
Activación del ajuste (velocidad ilimitada) → la pantalla mostrará un valor de batería del 99%, lo que corresponde a una velocidad máxima de 99 km/h.
Desactivación de la sintonización (velocidad limitada) → la pantalla mostrará un valor de batería del 25%, lo que corresponde a un límite de velocidad de 25 km/h.