SPEEDBOX 3.1 B.TUNING FOR BROSE
PROPERTIES:
Maximum speed: Unlimited
Speed limit setting:Yes
Display shows: Real speed
Tuning activation/deactivation:
SpeedBox App
WALK function
Button combination - + - + or + - + -
Compatible with motors:
Brose SPECIALIZED
Brose S-MAG
Brose S
Brose T
Brose C
Brose T-ALU
SRAM Powertrain by Brose
Not compatible with motors:
Brose S Mag FIT
BROSE Specialized SL
(For SL models use SpeedBox 3.1 B.Tuning for Specialized)
Not compatible with e-bikes:
E-bikes that do not have a connector in the display port
(usually there is just a dummy plug instead)
Not compatible with:
Enviolo Automatiq
We do not recommend updating the software of the e-bike
Smart third-generation tuning for Brose and Specialized motors with Bluetooth, including the SRAM Powertrain unit
SpeedBox 3.1 B.Tuning for Brose unlocks the speed limiter and allows riding at an almost unlimited speed, which will depend only on the pedaling cadence.
How does SpeedBox 3.1 B.Tuning work?
Our newest product features an easy and user-friendly control unit. The tuning kit can be activated directly from the mobile application or on your bike’s display. By activating the WALK assist function shortly a value of 99 km/h (62 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.
To deactivate the tuning kit, activate the WALK assist function again. The value of 25 km/h (16 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the product.
SpeedBox was also designed for e-bikes that do not have a classic control unit with WALK assist function. In this case you can just use the combination of + - + - buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.
You can set the maximum speed of an electric assistance in SpeedBox App or by changing modes: TURBO - TRAIL- ECO - OFF - ECO - TRAIL - TURBO. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by activating WALK assist function shortly or by turning the rear wheel 360°. The speed will always increase by 5 km/h. The last displayed limit will be saved after 5 seconds of inactivity.
Activation and deactivation of SpeedBox tuning for e-bikes with SRAM Powertrain unit
To activate or deactivate the tuning, briefly activate the WALK function or switch between two assistance modes (+ - + -).
Activation of tuning (unlimited speed) → the display will show a battery value of 99%, which corresponds to a maximum speed of 99 km/h.
Deactivation of tuning (limited speed) → the display will show a battery value of 25%, which corresponds to a speed limit of 25 km/h.
Setting the maximum assistance speed:
To set your custom maximum assist speed, first open the SRAM AXS app and go to the Ride Modes section. Here, it is possible to adjust the parameters of individual modes, such as Max Power, which you first decrease three times and then increase three times. The control unit briefly displays the current speed limit as the battery level in %. Then, using the WALK function, gradually set the maximum speed – each press increases the battery value by 5%, which corresponds to raising the speed limit by 5 km/h. For example, showing 55% battery means a 55 km/h limit, 60% means 60 km/h, and so on. The last displayed limit is saved after five seconds of inactivity.
SpeedBox App for SpeedBox 3.1 B.Tuning
SpeedBox App is an application specially designed for SpeedBox 3.1 B.Tuning, which uses Bluetooth technology to connect your e-bike to your mobile application. After downloading the application and connecting your mobile phone to your e-bike you will see current data and trip parameters displayed on your phone. Individual trips can be stored so that the results can be compared with friends and together they can monitor their performance. So just enjoy the ride and leave checking the parameters for later!
SpeedBox App features:
Tuning control
Speed limit settings
Saving and viewing your trips
Invisible tuning
Motor lock
Motor diagnostics
SpeedBox 3.1 B.Tuning is not limited to working with SpeedBox App. However, it is a great tool that will provide you with a complete overview of your performances.
Download SpeedBox App to your phone just before ordering the SpeedBox 3.1 B.Tuning. You can try out our demo version and get to know all the awesome features and, at the same time, make sure that the application is fully functional on your phone. To connect to the SpeedBox B.Tuning, your phone needs to be equipped with Bluetooth 4.0 or higher.
Get it on Google Play
Get it on App Store
Assembly
When connecting the SpeedBox to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning product is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 10 km before the tuning is activated.
INSTALLATION MANUAL
https://www.youtube.com/watch?v=1OXnQlMWmCM
