SpeedFun Furious Evo easy + is a tuning for ebike equipped with a Bosch Smart System motor that allows you to remove the 25 km/h speed block.
WARNING:
BEFORE PURCHASING THIS DEVICE, IT IS NECESSARY TO CHECK THE “PRODUCT CODE” OF YOUR BOSCH PERFORMANCE LINE CX / SX MOTOR.
THE “PRODUCT CODE” IS SHOWN ON THE MOTOR LABEL.
IN THE EXAMPLE THE TWO TYPES OF LABEL USED BY BOSCH ARE VISIBLE AND THE “PRODUCT CODES” OF THE MOTORS CIRCLED IN RED.
Performance Line SX BDU314Y - manufactured from 2023
Performance Line CX BDU374Y – manufactured from 2024
Performance Line CX BDU384Y – manufactured from 2025
THIS DEVICE IS NOT COMPATIBLE WITH EBIKES EQUIPPED WITH THE CLASSIC MAGNET ON THE SPOKES OR BRAKE DISC (see here)
THIS DEVICE IS NOT COMPATIBLE WITH EBIKES EQUIPPED WITH THE BOSCH ABS SYSTEM.
THIS DEVICE IS NOT COMPATIBLE WITH EBIKES EQUIPPED WITH A GPS SYSTEM (BOSCH CONNECTMODULE).
This speed release device is compatible only and exclusively with Bosch Performance Line CX (BES3) motors equipped with a magnet on the valve (Bosch Rim Magnet) regardless of the display or handlebar control.
All SpeedFun Furious Evo speed release devices can be activated and deactivated at any time and connection to the light output is not necessary.
What is SpeedFun Furious Evo tuning for Bosch Smart System?
The function of the Furious Evo tuning device for Bosch Smart System is to electronically manipulate the rotation speed of the rear wheel and to communicate to the motor a speed always lower than 25 KmH in order to obtain a real speed with a very high active motor. The maximum speed limit will therefore be dictated by the power of the engine added to the power expressed by one’s legs.
This speed release device is compatible only and exclusively with Bosch Performance Line CX (BES3) motors equipped with a magnet on the valve (Bosch Rim Magnet) with LED Remote/System Controller command (also compatible with Led Remote + Kiox 300/500, Intuvia 100 or System Controller + Mini Remote) or Purion 200.
When the device is active, the display will show the exact speed up to the threshold of about 20 KmH, beyond which a manipulated speed will always be shown below 25 KmH.
SpeedFun Furious Evo is supplied ready to use, plug and go, can be activated and deactivated at will and maintains the setting even after the ebike is turned off. It can be installed easily thanks to the compatible connectors.
The kit includes all the elements necessary for installation, thus guaranteeing extreme ease of assembly.
All these elements have been specifically designed and created by us to guarantee correct placement of the parts during installation phases and avoid malfunctions over time or inconveniences during your riding.
Since these parts are made internally at our company. company have been specifically designed to best fit the Bosch Performance Line CX (BES3) Smart System engine.
ATTENTION
This device is not compatible with ebikes equipped with a “classic” magnet on the spokes or brake disc.
This device is not compatible with ebikes equipped with the Bosch ABS system.
This device is not compatible with ebikes equipped with a GPS system (Bosch ConnectModule
INSTALLATION MANUAL
https://www.speedfun.bike/wp-content/uploads/2024/06/Istruzioni-FURIOUS-EVO-EASY-BOSCH-RIM-MAGNET-IT-EN-FR_compressed.pdf
