Speedbox 1.1 B.Tuning for 2022 BOSCH Smart System Bluetooth app + theft protection

SpeedBox

5.0/5.0 based on 1 review

€299,00 €309,00 Save €10

Tax includedShipping calculated at checkout

SPEEDBOX 1.1 BLUETOOTH - 2022 BOSCH SMART SYSTEM
Unlock the speed limit of your electric bike with a Bosch SpeedBox tuning chip. Unleash the full speed of your e-bike engine and ride it like a derestricted e-bike should be!

THE TUNING CHIP FOR E-BIKES WITH THE NEWEST BOSCH GEN4 MOTOR AND SMART SYSTEM

COMPATIBLE WITH DISPLAYS:
   KIOX
   INTUVIA
   NYON
   PURION
   COBI


COMPATIBLE WITH ENGINES (incl. Gen4):
   Active Line Plus
   Performance Line
   Performance Line CX Line
   Performance Line Speed
   Cargo Line


NOT COMPATIBLE WITH:

- ABS SYSTEMS 
- Not compatible with e-bikes that have a magnet attached to a valve (Bosch Rim Magnet)

SpeedBox B.Tuning brings a unique connection of e-bike and mobile phone and suppresses the speed limiter on your e-bike. When in use, the display shows the real speed up to 22.2 km/h. After exceeding this speed your actual speed is indicated on the last two digits of the display.

Example:
- 22.3 corresponds to a speed of 23 km/h
- 23.1 corresponds to a speed of 31 km/h

The actual speed and other riding data will be displayed correctly in our SpeedBox App - right on the display of your phone.

HOW DOES SPEEDBOX 1.1 B.TUNING WORKS?
To activate all the functions of the SpeedBox correctly, it is necessary to enter the menu and switch to the circumference of your bike after switching on the e-bike.

This tuning chip is also very easy to control. You will activate SpeedBox 1.1 B.Tuning via mobile app or directly on your e-bike’s control unit by activating the WALK assist function shortly (holding down the “-” button). Your e-bike display will show a value of 9,9 km/h (6,2 mph) and from now on you will be able to ride at unlimited speed.

To deactivate the tuning chip, activate the WALK assist function shortly again (by holding down the “-” button). Your e-bike display will show a value of 2,5 km/h (1,6 mph) and the speed limit will be reset to 25 km/h. Your e-bike will then work the same as before the chip installation.

SpeedBox was also designed for e-bikes that do not have the WALK assist function enabled, or activated. In this case, you can activate/deactivate tuning by switching between two assistance modes twice, i.e. by pressing the +-+- buttons.

When you first open the SpeedBox App, you will be asked to type in a new PIN. This PIN will be requested each time you open the SpeedBox App. After confirming the PIN, you will be asked to set a service password. Your service password will be used in case you forget the PIN or want to change it.

The "countdown" process will continue concealed during charging, therefore, if you charge your e-bike with a connected battery, you can ignore the following instructions. If you need to remove the battery from your e-bike in order to charge it, you need to wait for the SpeedBox to carry out the "countdown" process after the ride. When you stop your e-bike, the ongoing "countdown" process will be indicated by the increasing riding time. Once the "countdown" process is completed, the riding time stops and the e-bike display shows the correct distance travelled. The countdown process can be interrupted by turning off the ebike or by setting off, so it does not restrict the use of your e-bike in any way. However, you still need to have the countdown process run regularly to prevent tuning detection.

ASSEMBLY
We use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.

We strongly recommend using other safety features and protective gear to prevent injuries.

When stopping for a short time, in order to continue riding smoothly, we recommend keeping one foot on the pedal so that the countdown does not start.

When stopping for a longer period of time, allow at least a partial countdown to take place.

After a long ride, the countdown may take several minutes.

Do not remove the display if the countdown has not been finished.

Activate/deactivate the tuning before the ride (when the e-bike is standing still), not during riding.

We recommend not to exceed a speed of 35 km/h.








You May Like

Product title
€19,99 | €24,99
Quick Shop
Product title
€19,99 | €24,99
Quick Shop
Product title
€19,99 | €24,99
Quick Shop
Product title
€19,99 | €24,99
Quick Shop