Unlock the speed limit of your electric bike with a Bosch SpeedBox tuning chip. Unleash the full speed of your ebike engine and ride it like a derestricted e-bike should be!
Compatible with the latest Bosch FW upgrade (increased torque to 85NM)
Compatible with all 2020 BOSCH engines such as Active Line, Active Line Plus, Performance Line, Performance CX Line, including motors of the 4th generation (MY2020) with the anti-tuning software. Compatible with these displays: Intuvia, Purion, Nyon, Kiox, Cobi.
NOT compatible with Bosch Classic Line.
The advanced SpeedBox 3.0 B.Tuning is compatible with the SpeedBox App, which offers numerous additional functions that can be seen and saved on your mobile phone display. The new 3rd generation SpeedBox Bosch hardware has been completely redeveloped. As a result the speedometer is even more accurate and now it allow to set up you own speed limit.
The SpeedBox tuning chip fully unlock the speed limit of your ebike allowing for speeds up to +99 km/h. All data on the display remain correct: current speed, average and maximum speed, distance, and etc. The SpeedBox can be switched ON or OFF by just pressing the WALK button on the control unit.
For Bosch ebikes without a WALK button, there is also the option to switch the SpeedBox ON or OFF by just pressing the + - + - key combination.
EASY TO INSTALL
The SpeedBox tuning chip comes with original plugs and colour-coded wires for an easy and perfect fit. Installation manuals and videos provide step by step detailed instructions and are easy to follow and understand. The SpeedBox does not require any diagnostic tool for installation. After installation, the tuning is activated by pressing the WALK button, a value of 9,9 km/h (6,2 mph) appears on the display for approx. 3 seconds. This signal confirms that the tuning is activated and that the engine is now fully derestricted for speed up to +99km/h (most likely you will run out of gears before reaching that speed).
The tuning is deactivated by pressing the WALK button, a value of 2.5 km/h (1,6 mph) appears on the display for approx. 3 second. Now, the tuning chip is deactivated and the engine support is reset to its original limitation of 25 km/h. For Bosch ebikes without a WALK button, there is also the option to switch the SpeedBox ON or OFF by just pressing the + - + - key combination.
NOTE: If you are planning to install the SpeedBox on a brand-new bike, make sure you ride it for at least 1 -2 km before installing the tuning.
HOW TO SET UP THE MAXIMUM SPEED
To set the maximum speed, the mode must be changed: Turbo - Sport - Tour - Eco - Tour - Sport - Turbo. The current speed limit is then displayed. To change the current maximum speed, briefly press the WALK button or turn the rear wheel 360°. A displayed speed of 1.5 km/h corresponds to a maximum speed of 15 km/h, a displayed speed of 2.0 km/h corresponds to a maximum speed of 20 km/h, 3.0 km/h in the display corresponds to a maximum speed of 30 km/h etc. If 9.9 km/h is finally displayed, this corresponds to a maximum speed of 99 km/h. After five seconds of inactivity, the last saved limit is saved.
For the 4th generation (MY2020) Bosch engines, you must leave the ebike switched ON after you have finished your ride and until the display shows a constant speed of 0.0 km/h. Within this time the display will show the remaining time in minutes. Then the ebike can be safely parked.
THE SPEEDBOX APP
The SpeedBox App has been developed to work with the SpeedBox B. Tuning chip. The connection between the tuning and your smartphone is via Bluetooth technology. With this app you can and save numerous useful data and trip parameters. You have the option of saving routes you have travelled and sharing them with friends.
The SpeedBox App is an application specially designed for the SpeedBox 3.0 B.Tuning, which connects your ebike and your mobile phone via Bluetooth technology. With this app you will be able to monitor and save numerous useful data and trip parameters which can be shared between friends. So just enjoy the ride and check the parameters for later!
THE MOST IMPORTANT FUNCTIONS OF THE APP:
• Tuning control: Switch the tuning ON or OFF.
• "Safe mode": Tuning is no longer activated via WALK button but only via the phone app. This prevent unauthorised riders to activate the tuning.
• Motor Lock: The engine can be TURNED OFF via the app. This option protect your ebike from unauthorized access.
• Saving and viewing your trip: Save trip data to monitor your performance. The data can also be shared with friends.
• View technical data on your smartphone, e.g. current speed, average and maximum speed, distance, trip duration, total distance, cadence, battery level, range, torque & energy consumption (of driver and motor) etc.
• Access to the app is secured by an individually defined PIN and a personal password.
Important note: The SpeedBox 3.0 B.Tuning can be used without the phone app. However, with the app you will have a complete overview of your performances. Since the SpeedBox app receives the data directly from the ebike control unit, this data is more accurate than many conventional sports apps.
