Speedbox 3.1 B.TUNING for GIANT 2022 (RideControlGo)

Description

NOTE: Conventional tuning modules offer only limited functionality compared to today’s e-bike standards. They often rely on complex and unintuitive display button sequences for activating, deactivating, or adjusting speed limits. This makes operation cumbersome, especially during a ride. In some cases, users must stop the bicycle and manually rotate the rear wheel multiple times to initiate or confirm the selected setting — a process that is inefficient and inconvenient for real-world riding conditions.

In contrast, the EPAspeed B.Tuning series represents the next generation of e-bike tuning — fully app-controlled, firmware-resistant, and designed for effortless operation. With Bluetooth connectivity, intuitive controls, and invisible tuning functionality, EPAspeed delivers precision, reliability, and freedom unmatched by conventional solutions.

Key Features
• Tuning Control – Instantly activate or deactivate tuning
• Adjustable Speed Limits – Set your preferred maximum assistance speed
• Invisible Tuning Mode – Undetectable operation for smooth and safe performance
• Trip Recording – Automatically save and review detailed ride statistics
• Comprehensive Ride Data – Monitor distance, duration, average & max speed, and elevation

 👉 Click here to view the EPAspeed 1.1 B.Tuning for Giant

SPEEDBOX 3.2 B.TUNING GIANT

Compatible with all with Giant SyncDrive Pro 2022 (Yamaha PW-X3) such as Giant 2022 Syncdrive Pro motor and RideControl Go display.

NOT COMPATIBLE with Giant ebikes such as Trance E+, Fathom E+, Stance E+, Reign E+, and any other Giant ebike with Giant Yamaha Syncdrive Sport, Pro, Life engines (2017-2021)

PROPERTIES:
Activation: WALK button / WALK +/ + – + –
Maximum speed: unlimited
Speed limit setting: yes
Display shows: actual values
Only compatible with: RideControl Go, SyncDrive Pro motor 2022
Compatible with: SpeedBox App

Reliable third generation tuning chip for e-bikes with Giant 2022 Syncdrive Pro motor and RideControl Go.

SpeedBox 3.1 tuning chip enables to suppress the speed limiter on your electric bike. After the chip is installed your e-bike’s display shows real data, such as maximum and average speed, daily mileage and cruising range.

HOW DOES SPEEDBOX 3.1 WORK?
The tuning kit can be activated directly on your bike’s controller. After pressing the WALK button, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.

To deactivate the tuning kit, press the WALK button again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.

SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of + – + – buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.

You can set the maximum speed of an electric assistance by changing modes by switching modes three levels up and then three levels down. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 1,5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2,5 corresponds with 25 km/h, 3,0 corresponds with 30 km/h, 9,9 corresponds with 99 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.
SpeedBox App for SpeedBox 3.1 B.Tuning
SpeedBox App is an application specially designed for SpeedBox 3.1 B.Tuning, which uses Bluetooth technology to connect your e-bike to your mobile application. After downloading the application and connecting your mobile phone to your e-bike you will see current data and trip parameters displayed on your phone. Individual trips can be stored so that the results can be compared with friends and together they can monitor their performance. So just enjoy the ride and leave checking the parameters for later!

SpeedBox App features:
Tuning control
Speed limit settings
Saving and viewing your trips
Invisible tuning
Motor lock
Motor diagnostics
SpeedBox 3.1 B.Tuning is not limited to working with SpeedBox App. However, it is a great tool that will provide you with a complete overview of your performances.

Download SpeedBox App to your phone just before ordering the SpeedBox 3.1 B.Tuning chip. You can try out our demo version and get to know all the awesome features and, at the same time, make sure that the application is fully functional on your phone. To connect to the SpeedBox B.Tuning chip, your phone needs to be equipped with Bluetooth 4.0 or higher.

ASSEMBLY
When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activation.